<link rel="stylesheet" href="styles.f3b1fba60ec7970c.css">
ATENÇÃO: O depósito de novas publicações está temporariamente suspenso.

Fragmentação e hidrodesoxigenação dos resíduos de canade-açúcar via processo Organosolv catalítico para a produção de bio-óleo

Carregando...
Imagem de Miniatura

Título da Revista

ISSN da Revista

Título de Volume

Editor

Universidade Federal do Rio de Janeiro

DOI

Resumo

This work studied the delignification of sugarcane bagasse via catalytic Organosolv treatment using isopropanol as solvent and in situ hydrogen donor in the presence of commercial Ni-Raney catalyst and bulk Mo2C and supported in activated carbon (AC) or γ-Al2O3. These reactions were repeated to evaluate the treatment of bagasse and straw by adding H2 ex situ and in the presence of the Mo2C/AC catalyst. For reactions without H2 ex situ, the degree of delignification, the composition of the bio-oil and the solid residues depended on the type of catalyst. The reaction with bulk Mo2C exhibited the highest delignification degree (80 %). The Ni-Raney catalyst acted on hemicellulose-derived structures to form large amounts of acids, alcohols and furan derivatives. However, Mo2C type catalysts were more selective to lignin derived products, promoting the formation of benzene aromatics (~340 µg mgbiooil-1 reaction with Mo2C/AC). Enzymatic hydrolysis of post-reaction residues was also evaluated. Better yield and glucose concentration were obtained with the pretreated solid residue from carbide-based catalyst treatments. Mo2C/AC catalyst showed the highest yields and glucose concentrations (67 % and 13.7 g L-1, respectively). H2 ex situ reactions favored delignification and retention of carbohydrates in the solid phase. The detection of hydrocarbons was not considerable. However, Mo2C/AC is a promising catalyst for the recovery of different biomass fractions in a biorefinery.

Descrição

Citação

Avaliação

Revisão

Suplementado Por

Referenciado Por

Direitos e licensiamento

Acesso Aberto